Stone veneer installation in Tuscaloosa AL - stone that stays tied to the wall
Want stone on a plain or worn wall? We check the wall behind it first, then set stone that's tied into what holds it.
- Wall checked first We look at what will hold the stone before you pick one.
- Fastening shown to you On framed walls, I show you how it's tied into the framing.
- Permits settled early Any permit questions get sorted out before our crew starts work.
- Walkthrough at the end We walk the finished wall with you before calling it done.
- Licensed and insured.
- Free estimates at your property.
- We reply within 1 business day.
How do you know your wall needs stone veneer work?
Some calls start with a wall you'd like to change, and others with old stone that's letting go. Catching the second kind early keeps the repair smaller, because water spreads.
Stones loose or falling off
You can push a stone and it moves, or one has already dropped. It usually means the backing or fasteners gave out, and more will follow the longer it sits.
Dark stains below the stone
Streaks or damp patches under the veneer, or on the wall inside, usually mean water is getting behind it. Left alone, that water works on framing you can't see.
Cracked or bulging old veneer
A crack running through several stones, or a section that bows out, usually points to movement in the wall behind. Patching the face won't hold until that's sorted.
Plain block foundation showing
Bare block along the bottom of the house is a common reason people ask about veneer. Stone can dress it up once the block underneath is sound.
Worn siding you want covered
Tired siding or a dated fireplace wall often gets people thinking about stone. What's underneath decides how it's fastened, so we look before you pick a stone.
Hollow-sounding stucco or siding
A wall face that sounds hollow or gives when you press it isn't something to cover up. Stone over a weak surface hides the problem until it pulls loose.
How we handle stone veneer installation
I check the wall behind the stone before anything else, because manufactured veneer is a concrete product made to look like natural stone, and it's only as good as what holds it. If the wall is soft or shifting, we fix that first instead of hiding it. On framed walls, the wood or gypsum board over the studs can't carry the stone by itself, and fasteners set only in that board can work loose once it gets wet, so we fasten into the framing and I'll show you how it's tied in before the stone covers it. That fastening is also what helps keep the stone on in high winds. Then our crew sets the stone, keeps the joints even and cleans up as we go. The price moves mostly with the wall's size, how much prep it needs and the stone you pick, and the schedule turns on permit questions and the weather, so the estimate I write after seeing your wall is where you get your own figure.
When the wall itself is the problem, that work comes before any stone. A cracked or shifting foundation gets rebuilt through our foundation block wall installation work, and if you're adding a new garden or yard wall, our concrete block walls give the stone a sound wall to go on.
What happens when you call about stone veneer in Tuscaloosa?
From your first call to the walk around the finished wall, here's how a stone veneer job runs with us.
Call or send a request
Call (205) 579-1102 or send the form, and I come out to walk the wall with you. I'll point out anything soft, cracked or damp.
Read the written estimate
I write up the estimate after we've looked at the wall together, so what's on paper matches what I showed you.
Settle permits, then build
We settle permit questions first, and the city processes most home permits within 24 to 48 hours. Then our crew does the work while I check in.
Walk the finished wall
When the stone's up and the site's cleaned, we walk the finished wall together. Point at anything you want explained while it's in front of us.
Why Tuscaloosa homeowners call D&L Tuscaloosa Concrete and Masonry
I come out and price it
I look at your wall and write the estimate myself, then check in on our crew while they set the stone.
In business since 2017
We've been in business since 2017, and I explain each step as I go, so you can tell good work from a quick patch.
Licensed and insured on every job
We're licensed and insured, and you're welcome to ask for proof when I come out for the estimate.
At home on older Tuscaloosa houses
We're best known for brick and mortar repair on older homes, so we know what usually turns up behind an older wall face.
Get a stone veneer estimate for your wall
Tell us the wall's rough size, what's on it now and whether your house might be in a historic district. We reply within one business day to set a time, and I come out for a free, no-obligation estimate.
Stone veneer to look through
Look through these examples of stone veneer on walls, foundations and fireplaces to get a feel for the stone shapes and styles you could pick.
Stone veneer questions we hear
Here are answers to what people usually ask before putting stone on a wall. If your wall doesn't fit any of these, call and ask about it.
How much does stone veneer installation cost per square foot?
Across the US, stone veneer installation usually costs about $15 to $45 per square foot installed. Where your wall lands in that range depends on how much prep it needs, how it's fastened and the stone you choose. I'll price your own wall when I come out to look at it.
Can stone veneer go on any wall?
No, stone veneer shouldn't go over a wall that's deteriorating or unsound, or over EIFS, a foam board finished to look like stucco. That's from one trade group's installation guide, and the same guidance says that over masonry the stone won't bond to, a metal mesh called lath and a rough first coat of mortar go on before the stone. Over clay brick, it says not to bond manufactured stone straight onto the face.
When is the best time of year to install stone veneer in Tuscaloosa?
Mild weather is best. A trade group's guide specification calls for protecting the work at 40°F or below, and from fast drying above 100°F, before, during and after it goes up, so a Tuscaloosa job planned for a mild stretch needs less of that protection. Cold snaps and summer heat are what we plan around when we set a start date.
Does a stone veneer contractor need a license in Alabama?
Yes, once a home job runs over $10,000 in labor and materials together, Alabama treats the contractor as a residential home builder under the state's home builders board. On a job that size, ask to see the contractor's license. If you act as your own contractor under the state's homeowner exemption, any subcontractor whose share of the work costs more than $10,000 still has to be licensed.
How do I keep water from getting behind stone veneer?
Get the water barrier behind the stone right, because that layer is what keeps rain off the wall underneath. Over light wood-framed walls where that barrier is required, one trade group advises putting it on in two separate layers, lapped like shingles from the bottom of the wall up. Ask any installer how they'll handle yours before you sign.
How do I find out if my house is in a Tuscaloosa historic district?
Ask the city's Planning & Zoning office at hpc@tuscaloosa.com, because extra rules may apply to projects inside a Tuscaloosa Historic District. If you're not sure, mention it when you reach out, and we'll check before we schedule anything.
Stone veneer around Tuscaloosa
Tuscaloosa requires permits for remodels and alterations but doesn't list stone veneer, so we ask the city's permit administrators about your wall and handle the application if one's needed. We also work in Northport, McCalla and the cities around them.
Talk to us about stone veneer for your wall
Satisfaction guaranteed on every job, and the sooner we see the wall, the sooner you'll know if it's ready for stone.